HPLC Detectors | |||
|---|---|---|---|
| # 1370 | Dionex ED50 ED-50 Electrochemical Detector | ||
 |
Built suppressor controller Conductivity, DC amperometry, and integrated amperometry modes Temperature Compensation Conductivity up to 3000 mS Optional amperometri, conductivity cells, LAN card | ||
| $5200 | 
 | ||
| # 1722 | Dionex PDA-100 Photodiode Array Detector | ||
 |
Wavelength accuracy: ±:1 nm Optical system: single beam Flow cell volume and optical path: 13 µL, 10 mm Wavelength range: 190 to 800 nm | ||
| $5600 |
| ||
| # 1585 | Agilent Hewlett-Packard G1314A Variable Wavelength Detector | ||
 |
Communications: controller-area network (CAN), GPIB, RS-232C, APG remote. Detection type: double-beam photometer Part of Agilent HP 1100 series Wavelength range: 190 - 600 nm | ||
| $3750 |
| ||
| # 1587 | Agilent Hewlett-Packard G1315B DAD Diode-Array Detector | ||
 |
Communications: controller-area network (CAN), GPIB, RS-232C, APG remote Detection type: 1024-element photodiode array Part of Agilent HP 1100 series Wavelength range: 190 - 950 nm | ||
| $6900 |
| ||
| # 1215 | Dionex AD20 AD-20 Absorbance Detector | ||
 |
Absorbance range 0-2 AU Dual-beam optical system Optional LAN card is available. Wavelength range 190-800 nm, 1 nm increment | ||
| $3600 |
| ||
| # 1362 | Dionex AD25 AD-25 Absorbance Detector | ||
 |
Flow cell: PEEK 10 µ Wavelength range: 190 nm to 800 nm in 1nm increment Analog output range 0.001, 0.005, 0.01, 0.05, 0.1, 0.5, 1.0, 2.0, and 3.0 AU | ||
| $4900 |
| ||
| # 1368 | Dionex CD20 CD-20 Conductivity Detector | ||
 |
Built suppressor controller Conductivity up to 3000 mS Conductivity cell and optional LAN card are available. Temperature compensation | ||
| $3800 |
| ||
| # 1725 | Dionex CDM-2 Conductivity Detector | ||
 |
Temperature compensation: 0.0 to 9.9% per °C Conductivity range: 0.01 to 1000 mS Cell volume:1.25 mL; max. operating pressure: 300psi Cell drive: pulsed bipolar, fixed frequency Conductivity cell is included | ||
| $1800 |
| ||
| # 1219 | Dionex ED40 ED-40 Electrochemical Detector | ||
 |
Temperature compensation Conductivity, DC amperometry, and integrated amperometry modes Built suppressor controller Range: 0.01 mS to 3000 mS Conductivity, amperometry cells and optional LAN card are available. | ||
| $4200 |
| ||
| # 1727 | Dionex PAD-2 Pulsed Amperometric Detector | ||
 |
Maximum number of potentials in a program: 100 DC amperometry, and integrated amperometry modes Amperometry: potential range: ± 2V | ||
| $1800 |
| ||
| # 1728 | Dionex PED-2 Pulsed Electrochemical Detector | ||
 |
Amperometry: potential ranges ± 2V, maximum number of potentials in a program: 100 Conductivity, DC amperometry, and integrated amperometry modes Conductivity: cell volume: 1.5 mL, max. pressure 300 psi, temp. compensation 0.0-9.9% °C | ||
| $1800 |
| ||
| # 1724 | Dionex VDM-2 Variable Wavelength Detector | ||
 |
Wavelength accuracy: ±1 nm Dual-beam, fiber-optic beamsplitter Bandwidth: 6 nm Wavelength range: 190 to 800 nm, in 1 nm increments Cell path length: 6mm, volume: 9 uL, max. pressure 500 psi | ||
| $1800 |
| ||
| # 1589 | Enterprise PD2125 PD2100 Differential Refractometer | ||
 |
Temperature range 4 to 50°C Combines light scattering detector with a laser refrctometer Sample cell volume 10 ul Rayleigh scattering angles 90 ° and 15 ° Laser wavelength/power 680 nm /30 milliwatt Molecular weight range 25 to 30,000,000 daltons | ||
| $4500 |
| ||
| # 1081 | Hewlett-Packard HP 1046A Fluorescence Detector | ||
 |
Emission: Wavelength range190-800 nm, Bandwidth - 12, 25, 50, 140 nm Light source: Xenon flash, pulsed at 55- 220 Hz HP-IB and analog outputs Excitation: Wavelength range190-800 nm, Bandwidth - 12, 25, 50 nm | ||
| $3600 |
| ||
| # 1184 | Hewlett-Packard HP 1047A Refractive Index Detector | ||
 |
Temperature settings 30°C,35°C,40°C,45°,50°C. Refractive Index range 1.00-1.75 Flow cell maximum pressure 7 bar (103 psi) | ||
| $3600 |
| ||
| # 1644 | Hewlett-Packard HP 1050 Diode Array Detector | ||
 |
Wavelength accuracy: 1 nm Double beam photometer with five signals Wavelength range: 190 to 600 nm, in 1 nm increments | ||
| $4800 |
| ||
| # 1643 | Hewlett-Packard HP 1050 Multiple Wavelength Detector | ||
 |
Wavelength range: 190 to 600 nm, in 1 nm increments Double beam photometer with up to three signals Wavelength accuracy: 1 nm Multiple signal combinations HP part # 79854A | ||
| $4200 |
| ||
| # 1642 | Hewlett-Packard HP 1050 Variable Wavelength Detector | ||
 |
Wavelength accuracy: 2 nm Double beam photometer Bandwidth: 6.5 nm Wavelength range: 190 to 600 nm, in 1 nm increments HP part # 79853C | ||
| $3800 |
| ||
| # 1486 | Linear UVIS-205 UVIS205 Absorbance Detector | ||
 |
Wavelength range 190-800 nm, 1 nm increment Range selection from 0.0005 to3.0 AU | ||
| $2500 |
| ||
| # 1391 | Thermo Separation Products TCP UV2000 SpectraSystem | ||
 |
Aborbance up to 3 AU Variable dual wavelength detector Wavelength range: 190 nm to 800 nm in 1nm increment | ||
| $1900 |
| ||
| # 1765 | Waters 2487 Dual Wavelength Absorbance Detector | ||
 |
Wavelength accuracy: ±1 nm Waters 2487 has a wavelength range of 190-700 nm Bandwidth: 5nm Absorbance range: 0.0 -4.0 AU Path length: 10mm | ||
| $5400 |
| ||
| # 1181 | Waters 410 Refractive Index Detector | ||
 |
Temperature-controlled optics | ||
| $3600 |
| ||
| # 1222 | Waters 486 Tunable Absorbance Detector | ||
 |
Repeatability - 2 nm Wavelength range of 190-600 nm Accuracy - 2 nm | ||
| $3500 |
| ||
| # 1664 | Waters 490E Programmable Multiwavelength Detector | ||
 |
Wavelength accuracy: ± 2 nm Monitors four wavelengths simultaneously Spectral bandwidth: 4 nm Wavelength range: 190 to 600 nm Cell volume: 8 µL Max. pressure: 1000 psi | ||
| $2400 |
| ||
| # 1251 | Waters 994 Programmable Photodiode Array Detector | ||
 |
Measurement time 1-91.7 min Wavelength range 190-780 nm Four-channel signal output Band width 2-20 nm or full Printer/plotter output | ||
| $4800 |
| ||
| # 1295 | Waters M-470 Scanning Fluorescence Detector | ||
 |
|||
| $3600 |
| ||
| # 1050 | Hewlett-Packard HP 1049A Programmable Electrochemical Detector | ||
 |
HP-IB interface., analog output, Remote connector Includes electrochemical cell and optional solvent thermostat. Gold working electrode, reference electrode with internal electrolyte. | ||
| Sold |
| ||
| # 1612 | Waters 432 Conductivity Detector | ||
 |
Wetted materials: 316 stainless steel, PTFE, and PCTFE Conductivity range: 0 - 10000 µS/cm Waters part # WAT043061 Cell volume: 0.6 µL , cell pressure (maximum): 70 psi | ||
| Sold |
| ||
Copyright © 2016 Scientific Support, Inc. All rights reserved |
All Registered Trademarks are the property of their respective owners. |